OCEANLED AMPHIBIAN A3 PRO ULTRA WHITE UNDER WATER LIGHT
The Amphibian Pro Series raises the bar on the original Amphibian range with an increase in brightness by 75%! The A3Pro underwater light rivals any 75 watt Halogen on the market and with 8 times the power savings. The Amphibian Pro Series is for underwater use only however, due to its Active Thermal Control, a built-in temperature monitoring system, they can be used while under way. Exceptionally easy to install and versatile enough to be mounted onto any transom or hull. Maintenance is easy, just wipe away sea growth from its scratch resistant Tritonium Lens. - 3/8" Hole in Hull
- Equal to 75w Halogen
- 12vDC ONLY
- 40,000+ Hour Life
- Chemically Resistant Polymer
- Twin Core Wire
- Factory Sealed Unit
- No Breakable Parts
Mounting Recommendations A3 Pro Boat size up to: 9m (30')
Transom spacing: 0.5-1m (2-3')
Transom quantity: 2-4
Hull spacing: 0.5-1.2m (2-4')
For above and below water use Technical Light output equivalent to: 75W Halogen
Fixture Lumens* (total light output from a finished fixture): 350
Typical LED life expectancy: 40,000+ Hours
Minimum-Maximum operating voltage: DC 9-15vDC
Current / Amp draw (DC): 12vDC 0.5A
Approx. light penetration (avg. water quality): 4m (13')
Approx. Light penetration (perfect water quality) up to: 9+m (30')
Driver type Internal Physical Length of fixture: 92mm (35/8")
Width of fixture: 50mm (2")
Profile (height) of fixture: 21.5mm (3/4?)
Total weight: 110grms (3.8oz)
Extension cable length (standard): 2m (61/2')
Hole cut-out for cable entry: 9mm (3/8")
Material: Chemically resistant optical polymer
Lens: Tritonium Optical Lens
|
